industrial filter bag for dust collector
Polyester(PET/PE/PES) filter bag is the main filter material in bag filter.use world-class nonwovens needling technology to carve and lay up polyester staple fiber, then needle the finely woven fabric and evenly distributed fabric into felt. The filter media has strong strength, good resilience, stable fabric size, good abrasion resistance, large porosity, good air permeability, long service life and good dedusting filtration.Below 130 degree C It has good mechanical, acid and alkali resistance properites.
Polyester needle felt is the most cost-effective medium at low temperature.
Compared with the general woven filter, polyester needling dust filter bag has the following advantages:
1. Large porosity and good air permeability improved the load capacity of the equipment and reduce the pressure and energy consumption.
2.Huge dust removal efficiency and low emission. The experimental results that the efficiency of filtering 325 mesh slide stone powder (diameter of 7.5 um) can reach 99.9-99.99%, the gas emission is much more lower than national standard.
3. Finishes by hot set, singe, PTFE membrane, glazed.
Smooth surface and easy cake release,the service life is generally 1 ~ 5 times longer than woven filter cloth.
4.Chemical stability, not only good at high temperature gas filtration, but also suitable for acid and alkali including erosive gas.
Application:
Polyester filter media is widly used in cement grinding process, wood processing factory, smelting factory and other industries at the temperature lower than 130degree C.
Durling the processing of dust collector, if the gas or dust contain to much moisture and oil, including hygroscopicity, easy deliquescence dust, the surface of the filter bags may generate water or oil film and increase adhesion, although this will help to collect the dust, but will make cleaning difficult. Especially in the conditions with high temperature and high humidity, the condensation phenomenon caused by the external gas cooling effect. It can not only make the dust in the bag surface fouling or blockage, but also corrosion of structural materials, the dust running resistance increased, directly affects the normal operation of bag filter. In order to apply the special working conditions, prevent or mitigate dust bag pasting phenomenon, we need to do some improvements to make the work efficiency and extend service life of filter media.
Polyester dust collector filter bag parameter table
| Product name |
Polyester Filter Bag |
| material |
PET scrim |
Fiberglass scrim |
| weight(g/m2) |
450 |
500 |
550 |
600 |
400 |
450 |
500 |
550 |
600 |
| thickness(mm) |
1.6 |
1.8 |
2.0 |
2.2 |
1.4 |
1.6 |
1.8 |
2.0 |
2.2 |
| Ventilation rate(m3/m2/min) |
330 |
300 |
250 |
220 |
350 |
325 |
285 |
270 |
230 |
| Fracture strength(N/5*20cm) |
warp |
>750 |
>750 |
>800 |
>800 |
>1000 |
>1000 |
>1100 |
>1100 |
>1150 |
| weft |
>1150 |
>1200 |
>1300 |
>1400 |
>1250 |
>1300 |
>1400 |
>1500 |
>1500 |
| Elongation at break(%) |
warp |
<35 |
<35 |
<35 |
<35 |
<25 |
<25 |
<25 |
<25 |
<25 |
| weft |
<55 |
<55 |
<55 |
<55 |
<45 |
<45 |
<45 |
<45 |
<45 |
| Working temperature(ºC) |
<130 |
<130 |
<130 |
<130 |
<130 |
<130 |
<130 |
<130 |
<130 |
| Instantaneous operating temperature(ºC) |
150 |
150 |
150 |
150 |
150 |
150 |
150 |
150 |
150 |
| The fracture strain(Mpa/min) |
2.20 |
2.25 |
2.35 |
2.45 |
2.30 |
2.40 |
2.45 |
2.50 |
2.60 |
| Acid resistance |
good |
good |
| Alkali resistance |
medium |
medium |
| Wear resistance |
excellent |
excellent |
| Hydrolytic stability |
medium |
medium |
| Finish |
Anti-acid resistance,PTFE membrane,heat setting,water and oil repllent... |
Remark: We always provided the products customization service.
P84 / nomex / polyester /PTFE /FMS/PP needle punched high temperature filter felt cloth bag
Our P84 filter felt is made from LENZING company's INSPEC fibers .
Feature:
- high working temperature 260ºC ,But there is safe space to cope with outages and accidents, etc.
- Good chemical resistance In the past ten years, the filtration value of p84 filter bag for acid waste dust has been proved in waste incineration.
- Low reverse washing pressure and high efficiency of elastic desliming cakeTechnical data sheet
| Material fiber |
P84 |
|
| scrim |
P84 |
|
| weight |
500g/m2 |
|
| Thickness |
2.2mm |
|
| Tensile strength (N/5×20cm) |
warp |
≥1100N / 5cm |
|
| weft |
≥1300N / 5cm |
|
| Tensile elongation (%) |
warp |
≤30% |
|
| weft |
≤40% |
|
| Air permeability (L/m2/S) (m3/m2·min) |
200-300 17
|
|
| 260ºC hot air shrinkage warp |
< 1% |
|
| 260ºC hot air shrinkage weft |
< 1% |
|
| Working temperature |
260ºC |
|
| Peak temperature |
280ºC |
|
| Finishing treatment |
Heating ,singeing ,calendering |
|
Application :At present, P84 filter bag has rich application experience has been obtained in gypsum plant, cement plant, waste incinerator, liquid fluidized bed boiler, coal-fired boiler and so on.
RIQI ( HANGZHOU ) FILTER TECHNOLOGY CO.,LTD. has grown up to be one of leading manufacturer on dust filtration&spare parts in China.We have imported filter needle felt production line ASSELIN from France and we can produce very good quality non-woven products according customer's requirment.
Based on 8 needle felt production line ,our annual production ability can achieved 20,000 square meters per day . We can produce a large range of various filter fabric, such as polyester filter fabric, Acrylic filter fabric, Fiberglass filter fabric, PPS filter fabric, Nomex ,P84 ,PTFE ,wool felt ,woven filter fabric and so on.
The most important thing is that we introduced German high technology to develop the first filter bag production line in China. Which help most filter bag production factory save a lot of human lab our cost but promote the work effection . The advanced technology and simple operation way of automatic filter bag production line has won a lot of customer's praise.
Q: ,What certifacation you have?
We have got ISO9001 and SGS certification
Q: How long is your delivery time?
A: Generally it is 5-10 working days if the goods are in stock. or it is 15-20 days if the goods are not in stock.It depends on the quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment≤1000USD, 100% in advance. Payment≥1000USD, 30% T/T in advance, balance before shippment.
Q. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them.
Q:What should I do if I'm not satisfied with your product?
A:Please contact us as soon as possible and tell us where went wrong.We can only accept refund or exchange if there is any quality issue.
IF you have some interesting please contact us without any hesitate, we will reply you within 24 hours and welcome to have a visit to our factory for more further business and know each other better. We do have the keen interesting to cooperate with you near future.
Audited Supplier 
){kind=link}